What is the purpose of a thermostat valve as used in the cooling system of an automobile
- To regulate the flow of coolant so that engine comes to working temperature early
- A thermostat is used to control cooling closed when very cold condition
- Thermostat Valve control temperature so highest temperature thermostat allow liquid coolant floor from Radiator after lower temperature thermostat disallow coolant Thermostat opens temperature degree 90% heating
- A thermostat is used to keep the constant working temperature in the engine…when the engine is not enough hot to have working temperature… The thermostat blocks water supply which goes to the radiator and rotates that water in the engine block until it reaches the correct working temperature…after overheating the engine bit thermostat opens and passes that water through radiator…and then that water is cooled…this process repeats every time
- It is to manage the thermal efficiency in the otto cycle to obtain an optimistic operation.
- It controls temperature
- Fuel consumption
- Carbon detonation
- The thermostat is keeping the engine temperature when the engine is cool the cooling water is not getting into the radiator the thermostat clothed and the engine is heated the thermostat is open the cooling water pass into the radiator and the cooling proses are done.
- It determines how fast the engine gets hot, as well as making sure the engine runs at an operational temperature according to specification, all cars have different specifications
- If the engine is cold, the thermostat is close, the coolant will circulate only in the radiator and in bypass hose back to the radiator…but when the engine becomes hot, the thermostat opens the passage of coolant through the water jacket and whole engine coolant gallery and back to the radiator to regulate the temperature of the engine.
- Bringing the engine operating temperature in the quickest possible time, consequently, thermal efficiency improves and decreases engine wear and tear.
0 coment�rios: